W E Reserv E The Right To Change Execution And Construction - Meiko DV 80.2 Operating Instructions Manual

Operating instructions DV 80.2 / DV 120.2 / DV 125.2 / DV 200.2 / DV 200.2 PW
Par. Configuration
No. options
113 Total number of
wash cycles since
last reset
114 Serial number
115 Condition
Remaining
cartridge capacity
119 IR-communication
120 Total number of
wash cycles
Indication
121 Activate
maintenance
display
122 Operating hours
reference value
123 Batch counter
reference value
124 Reset
maintenance
display
201 Machine type
Datei:BA_DV80.2_120.2_125.2_200.2_200.2PW_9625769_EN_2002-10.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Use as value
range
Indication 5 figures
Indication 8 figures
Indication 0 ..100
Parameters 0/1
Parameters 0/1
Parameter 0 .. 3
Parameter 10 .. 10000
Parameter 100 .. 50000
Parameter 0/1
Parameters 1 – 9
DV 80.2 /
DV 200.2
DV 120.2 /
DV 125.2 /
DV 200.2
PW

W e reserv e the right to change execution and construction!

Unit Factory
setting
- Wash cycles/loads,
re-setting possible
- Option for calling up works
parameters
% Only for partial / full desalination
TE: indication in %
VE: 100 = OK;
0 = Replace
- 1 It is possible to shut off
communication via IR interfaces(0)
- 0 Effective only upon power supply
reset ON/OFF
ATTENTION! All changes to
service parameters will be
reversed.
Power supply reset must be
carried out within 5 minutes,
otherwise factory settings will not
be loaded.
Without power supply reset, the
information 123 will be displayed.
0 0 = OFF
1 = Operating hours
2 = Batch counter
3 = Operating hours or number of
batches
Hour 0 Evaluation according to operating
hours
Loads 0 Evaluation according to number of
batches
0 0 = NO
1 = YES
Note: When using the M-
Commander an upload and
download is necessary for the
reset procedure.
- 1: FV 40.2 / FV 60.2 / FV28 GiO-M
2: FV 130.2 / FV 250.2 / DV 270.2
3 3: DV 80.2 / DV 200.2
4: DV 120.2 / DV 125.2 /
4 5: FV 70.2D / FV 40.2TL /
6: FV 130.2 TL / FV 250.2 TL /
7: DV 80.2 TL / DV 200.2 TL
8: DV 120.2 TL / DV 125.2 TL /
DV 200.2 TL PW
Attention! Only assignment list
and machine sequences change –
no parameters
Note
DV 200.2PW
TopClean60
DV 270.2 TL
9625769 33/46