Table of Contents
Advertisement
Enter/Exit Programming Mode
I 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for
page
148
Mode, or the second fixed length if in
length includes the bar code's check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length). See
detailed programming instructions.
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
I 2 of 5 Zero Pattern
Enables/disables ZERO-Digit decoding. This character does not represent any
cipher. It allows encoding of an odd number of ciphers with Interleaved 2 of 5.
It must be enabled to decode Code 2 of 5 CIP/HR.
DEFAULT
$CI2ZP01
I 2 of 5 Zero Pattern = Enable
144
142. Length 2 is the maximum label length if in
$CI2L2
50 = Length 2 is 50 Characters
DEFAULT
I 2 of 5 Length Control on
Variable Length on page
Fixed Length on page 148
"Set Length 2"
on page 247 for more
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
$CI2ZP00
I 2 of 5 Zero Pattern = Disable
Interleaved 2 of 5 (I 2 of 5)
Mode. The
Appendix D, Key-
~
Heron™ HD3130
Advertisement
Table of Contents
