Options - Icom IC-M802 Instruction Manual

15

OPTIONS

AT-130/E
automatic antenna tuner
Matches the transceiver to a long wire
antenna with a minimum of insertion
loss.
MN-100
antenna matcher
Match the transceiver to a dipole an-
tenna. Covers all HF bands from 1.5 to
30 MHz. 8 m (26.2 ft.) × 2 antenna wires
are included.
SP-24
external speaker
Same as that supplied with the trans-
ceiver. Mounting bracket, MB-82 is sup-
plied with the speaker.
Maximum AF input/impedance: 5 W/4 Ω
OPC-1147/N
shielded control cable
Shielded control cable protects the trans-
ceiver from RF feedback and extends the
separation between AT-140 and transceiver
up to 10 m (32.8 ft.).
66
AT-140
automatic antenna tuner
Antenna and control cable receptacles
for easy installation and tuner through
function are available.
MN-100L
antenna matcher
Match the transceiver to a long wire an-
tenna. Covers all HF bands from 1.5 to
30 MHz. 15 m (49.2 ft.) × 1 antenna wire
is included.
HM-135
hand microphone
Same as that supplied with the IC-M802.
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used
with equipment that is not manufactured or approved by
Icom.
AH-710
folded dipole antenna
Covers from 1.9 to 30 MHz band. Has
an SO-239 connector. Easy to assemble
(non-kink construction).
RC-25
remote controller
Same as that supplied remote with the
transceiver. Mounting bracket, MB-81, is
supplied with the controller.
MB-75
flush mount kit
For mounting the remote controller
(RC-25) or the SP-24 to a panel.