Quick Reference; How To Set A Channel/Group - Icom IC-M802 Instruction Manual

QUICK REFERENCE

■ How to set a Channel/Group

The IC-M802 has up to 160 user-programmable, 249
ITU SSB duplex, 124 ITU SSB simplex and 662 ITU
FSK duplex channels.
D Using the group and channel selectors
[GRP]
D Using the keypad
Numeral keys
• When selecting an user-programmable channel
➥ Push the appropriate numeral keys to set the 1,
2 or 3-digit channel number, then push [ENT].
• Pushing [CE] clears input digits and retrieves the
channel.
Example; When selecting Ch. 1.
Push [1 ] then push [ENT].
nb
Example; When selecting Ch. 35.
Push [3 ], [5
scan
Example; When selecting Ch. 128.
Push [1 ], [2
nb sql
• Available channel groups and channels
Channel No. Description
1 to 160 User Ch.*
401 to 427 4 MHz ITU duplex Ch.
4-1 to 4-9 4 MHz ITU simplex Ch.
601 to 608 6 MHz ITU duplex Ch.
6-1 to 6-9 6 MHz ITU simplex Ch.
801 to 832 8 MHz ITU duplex Ch.
8-1 to 8-9 8 MHz ITU simplex Ch.
iii
[CH]
[CE] [ENT]
×
] then push [ENT].
agc
], [8 ] then push [ENT].
Mid
Channel No.
1 1201 to 1241
12-1 to 12-9
1601 to 1656
16-1 to 16-9
1801 to 1815
18-1 to 18-9
2201 to 2253
q Rotate [GRP] to select a desired group.
• Available groups are shown in the list below.
• During user-programmable channel group use, the
channels change in 20-channel steps. See details on
p. 8.
Example; When starting the user-programmable Ch. 1.
1⇔21⇔41�141⇔401⇔4-1⇔601��C2-1�1
w Rotate [CH] to select a desired channel.
• Available channels are shown in the list below.
• Pushing [Y]/[Z] on the microphone also selects a
channel.
• When selecting an ITU duplex channel
➥ Push the appropriate numeral keys to set the 3,
4 or 5-digit channel number, then push [ENT].
• Pushing [CE] clears input digits and retrieves the
previous channel.
Example; When selecting Ch. 401.
×
Push [4 ], [0
sp
Example; When selecting Ch. 2505.
Push [2 ], [5
sql
[ENT].
• When selecting an ITU simplex channel
➥ Push the appropriate numeral keys to set the 5
or 6-digit channel number, then push [ENT].
• Push [0 ] 3 times to enter "– (dash)."
dim
• Pushing [CE] clears input digits and retrieves the
previous channel.
Example; When selecting Ch. 4-1.
×
Push [4 ], [0
sp
push [ENT].
- After pushing [0
Example; When selecting Ch. 25-2.
Push [2 ], [5
sql
[2 ] then push [ENT].
sql
- After pushing [0
Description Channel No.
12 MHz ITU duplex Ch. 22-1 to 22-9
12 MHz ITU simplex Ch. 2501 to 2510
16 MHz ITU duplex Ch. 25-1 to 25-9
16 MHz ITU simplex Ch. C1-1 to C1-21
18 MHz ITU duplex Ch. C2-1 to C2-31
18 MHz ITU simplex Ch. 4001 to 25040
22 MHz ITU duplex Ch.
1
* [GRP] changes in 20 channel steps. *
], [1 ] then push [ENT].
dim nb
× ×
], [0 ], [5 ] then push
agc dim agc
], [0 ], [0 ], [1
dim dim dim nb
] 3 times, "–" appears.
dim
×
], [0 ], [0 ], [0
agc dim dim
] 3 times, "–" appears.
dim
Description
22 MHz ITU simplex Ch.
25 MHz ITU duplex Ch.
25 MHz ITU simplex Ch.
C1 channels
C2 channels
ITU FSK duplex Ch.*
2
SITOR use— no group separation.
] then
],
dim
2