Audio Output/Squelch Adjustment; D Squelch Function - Icom IC-M802 Instruction Manual

■ Audio output/squelch adjustment

D Audio output level
➥ Rotate [VOL] to adjust audio output level.
NOTE: Make sure that no "
tors are displayed during audio level adjustment,
otherwise, audio may not be output.
If either or both indicators are displayed, perform
the following operations;
- When " " is displayed, push [F] then [4
S P
- When "SQL" is displayed, push [F] then [2

D Squelch function

➥ Push [F] then [2 ] to turn the squelch function
sql
ON or OFF.
• Squelch level adjustment
q Push [F] then [2 ] to turn ON the squelch func-
sql
tion.
• First select the desired frequency or channel.
w Push [F] then [MODE
mode.
[GRP]
• Voice squelch function
The voice squelch function detects voice components
in the received signal and opens the squelch only
when voice components are included in the signal.
q While holding down [MODE
power to enter the initial set mode.
[CH]
[GRP]
" and "SQL" indica-
S P
×
].
sp
].
sql
[F] [2 ]
SQL
] to enter the quick set
set
[F] [MODE ]
SET
[2 ]
SQL
[CH]
], turn ON the
set
[MODE ]
SET
[POWER]
U S B
CH
SQL
L H
"SQL" appears when the squelch function is ON.
e Rotate [GRP] to select the "S-SQL LEVEL" item.
r Rotate [CH] to adjust the squelch level.
• Adjust the level to between 1 and 100.
I T E M
t Push [MODE ] to exit the quick set mode.
set
w Rotate [GRP] to select the "VOICE SQL" item.
e Rotate [CH] to turn the voice squelch function ON
or OFF
* * * S E T M O D E * * *
O F F
O N
ÇÇ
I T E M
r Turn the power OFF then ON again to exit the ini-
tial set mode.
QUICK REFERENCE
[4 ] [2 ]
×
SP SQL
[F] [VOL]
SIMP
---GPS---
Lat 45 59'N
Lon134 44'E
16:23
S E L
S E L
iv