Lightware MMX6x2-HT200 User Manual page 75

Network configuration
Query the current IP status
Set the IP address
Set the subnet mask
Set the gateway address
Set the TCP/IP port
Query the status of Ethernet ports
Set the status of Ethernet ports
Section 7. LW2 programmers' reference
Operation
See in
chapter
7.4.1 {IP_STAT=?}
7.4.2 {IP_ADDRESS=<type>;IP_ADDRESS}
7.4.3 {IP_NETMASK=<subnet_mask>}
7.4.4 {IP_GATEWAY=<gateway_address>}
7.4.5 {LW2_PORT=<port_nr>}
7.4.6 {ETH_ENABLE=?}
7.4.7 {ETH_ENABLE=<Ethernet_ports>}
MMX6x2-HT
User's Manual
Command
Page 75 / 119