Lightware MMX6x2-HT200 User Manual page 40

Setting the Subnet mask
Step 1. Navigate to Network Settings / Subnet mask submenu
Step 2. To change the numbers press the enter  button and
Step 3. Set the numbers by the up ▲ and down ▼ buttons
Step 4. Press the escape ● button twice to navigate out from
Setting the Static gateway
Step 1. Navigate to Network Settings / Static gateway
Step 2. To change the numbers press the enter  button and
Step 3. Set the numbers by the up ▲ and down ▼ buttons
Step 4. Press the escape ● button twice to navigate out from
LW2 port setting
Step 1. Navigate to Network Settings / Lw2 Port submenu and
Step 2. To change the numbers press the enter  button and
Step 3. Set the numbers by the up ▲ and down ▼ buttons
Step 4. Press the escape ● button twice to navigate out from
LW3 port setting
Step 1. Navigate to Network Settings / Lw3 Port submenu and
Step 2. To change the numbers press the enter  button and
Step 3. Set the numbers by the up ▲ and down ▼ buttons
Step 4. Press the escape ● button twice to navigate out from
Apply settings
Step 1. Navigate to Network Settings / Apply Settings submenu and press the enter  or
Step 2. Press the enter  button to confirm.
INFO
The MAC address is also available in the Network settings submenu (read-only).
Page 40 / 119
and press the enter  button.
use left ◄ and right ► buttons to place the cursor to
the desired number.
and press the enter  button to save changes.
the submenu. You will be prompted to apply settings – press the enter  button.
submenu, press the enter  button.
use left ◄ and right ► buttons to place the cursor to
the desired number.
and press the enter  button to save changes.
the submenu. You will be prompted to apply settings – press the enter  button.
press the enter  button.
use left ◄ and right ► buttons to place the cursor to
the desired number.
and press the enter  button to save changes.
the submenu. You will be prompted to apply settings – press the enter  button.
press the enter  button.
use left ◄ and right ► buttons to place the cursor to
the desired number.
and press the enter  button to save changes.
the submenu. You will be prompted to apply settings – press the enter  button.
the right ► button.
¹Network
½Subnet mask
¹Subnet mask:
255.255.255.0½
Apply Settings
ENTER=Yes ESC=No
¹Network Settin¥
½Static gatewaº
¹Static gateway
192.168.000.00½
Apply Settings
ENTER=Yes ESC=No
¹Network Settin¥
½Lw2 Port
¹Lw3 Port:
10001
Apply Settings
ENTER=Yes ESC=No
¹Network Settin¥
½Lw3 Port
¹Lw3 Port:
06107
Apply Settings
ENTER=Yes ESC=No
Section 5. Installation and operation
º
º
½
º
½