Table of Contents
Advertisement
3.1.4 Other requirements for installation
The NextMove ES requires +5 V and ±12 V power supplies. The total power requirement
H
(excluding any option cards) is +5 V at 1 A, +12 V at 50 mA and -12 V at 50 mA. If digital
outputs are to be used, a supply will be required to drive them - see section 4.4.2.
A PC that fulfills the following specification:
H
Processor
Hard disk space
CD-ROM
Serial port
Operating
* For USB support, Windows 2000, XP or Vista is required. Software installation will be
described later, in section 6.
A USB cable, or a serial cable connected as shown in section 4.5.4.
H
Your PC operating system user manual might be useful if you are not familiar with Windows.
H
Servo Systems Co. • 115 Main Road • P.O. Box 97 • Montville, NJ,
MN1928
07045-0097 • (973) 335-1007 • Toll Free: (800) 922-1103
Minimum specification
Intel PentiumIII
500 MHz
RAM
128 MB
RS232 or RS485 serial port (depending on NextMove ES model)
Screen
1024 x 768, 16-bit color
Mouse
Windows 95*, NT*
system
Fax: (973) 335-1661 • www.servosystems.com
50 MB
A CD-ROM drive
USB port
or
A mouse or similar pointing device
www.baldormotion.com
Recommended specification
Intel PentiumIII / 4 or equivalent
1 GHz or faster
1 GB
50 MB
1152 x 864, 16-bit color
Windows 98*, ME*, NT*,
2000, XP, Vista
Basic Installation 3-3
Advertisement
Table of Contents
