6.11 Saving setup information
When power is removed from the NextMove ES all data, including configuration and tuning
parameters, is lost. You should therefore save this information in a file, which can be loaded
when the card is next used.
1. In the Toolbox, click the Edit & Debug icon.
2. On the main menu, choose File, New File.
A new program editing window will appear.
3. On the main menu, choose Program,
Generate Mint Startup block.
Mint WorkBench will read all the
configuration
NextMove ES and place it in a Startup
block. For details of the Startup block,
see the Mint help file.
Servo Systems Co. • 115 Main Road • P.O. Box 97 • Montville, NJ,
6-32 Operation
information
from the
07045-0097 • (973) 335-1007 • Toll Free: (800) 922-1103
Fax: (973) 335-1661 • www.servosystems.com
www.baldormotion.com
MN1928