Table of Contents
Advertisement
5.2 BPL010-501 non-isolated backplane
This backplane provides direct connection to the NextMove ES signals without isolation. The
electrical specifications of all signals are therefore the same as described in section 4.
In the following sections, the signals AGND, DGND and Shield are listed with nominal
corresponding pins on the 96-pin connector, although they are all electrically connected on the
backplane. The OUT COM pin on connector X11 is not connected to ground.
Some signals are duplicated on multiple identically named pins on the 96-pin connector.
In these cases, only the lowest numbered pin is listed.
Some components are static sensitive devices. Take appropriate ESD precautions
when handling the backplane.
CAUTION
Servo Systems Co. • 115 Main Road • P.O. Box 97 • Montville, NJ,
5-2 Backplanes
07045-0097 • (973) 335-1007 • Toll Free: (800) 922-1103
Fax: (973) 335-1661 • www.servosystems.com
www.baldormotion.com
MN1928
Advertisement
Table of Contents
