Table of Contents
Advertisement
3.1.2 Installing the NextMove ES card
Before touching the card, be sure to discharge static electricity from your body
and clothing by touching a grounded metal surface. Alternatively, wear an earth
strap while handling the card.
CAUTION
The NextMove ES is designed to be mounted in a IEC297 / DIN41494 rack with card frames
and guides to support the card. An additional backplane card is recommended (see section 5).
1. Mount the backplane connector card (optional) at the rear of the rack system.
2. Slide the NextMove ES card into the guide rails, ensuring that it plugs securely into the
backplane connector.
3. Confirm that any neighboring cards or equipment are not touching the NextMove ES card.
3.1.3 Dimensions and hole positions
5 mm (0.2 in)
5 mm (0.2 in)
30.9 mm (1.22 in)
Servo Systems Co. • 115 Main Road • P.O. Box 97 • Montville, NJ,
3-2 Basic Installation
07045-0097 • (973) 335-1007 • Toll Free: (800) 922-1103
Fax: (973) 335-1661 • www.servosystems.com
95 mm (3.74 in)
100 mm (3.94 in)
www.baldormotion.com
5 mm (0.2 in)
5 mm (0.2 in)
MN1928
Advertisement
Table of Contents
