Operator Panel Factory Reset - Siemens Sinamics G120 Operating Instructions Manual

Operator panel factory reset

This option resets the IOP to its default factory settings. All
previous settings stored on the IOP will be lost. Any
parameter sets stored on the IOP will not be deleted.
Display backlight
This option allows the user to change intensity of the display
lighting.
For details of selecting this function see Initial Set-up
(Page 16)
Display contrast
This option allows the user to change the contrast between
black and white on the display.
For details of selecting this function see Initial Set-up
(Page 16)
Lighting duration
The backlight display, by default, is set to automatically turn
off after 60 seconds from the last key press. This time can
be adjusted to 30 seconds, 60 seconds, 300 seconds or
permanently on.
For details of selecting this function see Initial Set-up
(Page 16)
Intelligent Operator Panel (IOP)
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Menu
6.5 Extras
77