Siemens Sinamics G120 Operating Instructions Manual page 91

13.
14.
15.
16.
Intelligent Operator Panel (IOP)
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
The screen will return to p7767 index 2 and shows the
value previously set.
Scroll down to p7767 index 29 and then press "OK"
Because the password is less than 30 characters,
p7767 index 29 must contain the value 0.
Ensure that all the digits are zero (0), then press "OK"
The screen will return to p7767 index 29 and shows the
value previously set.
The password has now been set.
Press "ESC" to return to the "ALL PARAMETERS" list in preparation to confirm the
new password.
Menu
6.7 Know-how Protection
91