Language Selection - Siemens Sinamics G120 Operating Instructions Manual

If the Wizard menu is not required, then press Esc to
return to the normal status screen.

Language selection

To select the language that the IOP should display, the following actions should be
performed:
1. Rotate the Wheel to select "Menu".
2. Press the Wheel to confirm selection.
3. The "Menu" screen is displayed.
4. Rotate the Wheel to select "Extras".
5. Press the Wheel to confirm selection.
6. The "Extras" screen is displayed.
7. Rotate the Wheel to select "Panel Settings"
8. Press the Wheel to confirm selection.
9. Rotate the Wheel to select the required language.
10. Press the Wheel to confirm selection.
11. The "Language" screen is displayed.
12. Rotate the Wheel to select the language.
13. Press the Wheel to confirm selection.
14. The selected language will now be used by the IOP.
15. The IOP will return to the "Extras" menu.
16. Press "Esc" for more than 3 seconds to return to the
The number of available languages will vary depending upon the languages that have been
added or deleted by the user and the software version of the IOP.
Intelligent Operator Panel (IOP)
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
"Status" screen.
Installation
3.2 Initial Set-up
17