Overview
2.1
Introduction
The Intelligent Operator Panel (IOP) has been designed to enhance the interface and
communications capabilities of SINAMICS Inverters.
The IOP connects to the Inverter through an RS232 interface. It has been designed to
automatically recognise the following devices from the SINAMICS range:
● SINAMICS ET200 PRO*
● SINAMICS ET200S*
● SINAMICS G110D*
● SINAMICS G120 CU230P-2
● SINAMICS G120 CU240B-2
● SINAMICS G120 CU240E
● SINAMICS G120 CU240E-2
● SINAMICS G120 CU240S
● SINAMICS G120 CU250S-2
● SINAMICS G120C
● SINAMICS G120D-2 CU240D-2*
● SINAMICS G120D-2 CU250D-2*
● SINAMICS S110 CU305*
*Denotes Control Units that require the IOP Hand-Held Kit to connect the IOP to the Control
Unit.
Hand-Held Kit order number: 6SL3255-0AA00-4HA0.
Optical cable order number: 3RK1922-2BP00
The IOP provides support, using the USB connection utilizing a PC for the following
functions:
● Downloading of wizards
● Downloading additional languages
● Downloading of IOP firmware updates
The downloads can be found by searching the Siemens Service and Support website:
Service & Support website (http://support.automation.siemens.com)
Intelligent Operator Panel (IOP)
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
2
9