Menu
6.2 Diagnostics
6.2
Diagnostics
Diagnostics menu
When the diagnostic function is selected the following options are presented:
• Active faults/alarms
• History
• Identification/Maintenance
• I/O status
• Communications status
• I/O simulation
• Drive enables
Active faults/alarms
When this option is selected the screen will display any active
faults and alarms that have not yet been acknowledged.
Each fault and alarm can be selected and by pressing the
INFO key or the OK key, an explanation of the fault or alarm
will be displayed.
Pressing INFO or OK or Esc will return the display to the
previous list of faults and alarms.
History
When this option is selected the screen will display a list of all
previous faults and alarms with the time that they occurred.
Each fault and alarm can be selected and by pressing the
INFO key or the OK key, an explanation of the fault or alarm
will be displayed.
Pressing INFO or OK or Esc will return the display to the
previous list of faults and alarms.
58
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Intelligent Operator Panel (IOP)