Wizards - Siemens Sinamics G120 Operating Instructions Manual

Wizards

Overview
The IOP wizards are question-driven macros that assist the user to set-up various functions
and applications of the Inverter.
Commissioning the Inverter
During commissioning of the Inverter it is essential to ensure that the system is in a safe
and stable state, as some commissioning processes have the potential to start the motor.
Therefore it is important to secure any loads and ensure that should the motor start, no
potentially dangerous conditions exist.
Datasets
The wizards use the default Drive Datasets (DDS0 and CDS0), if the default datasets are
changed to the other datasets available, the wizards may not function correctly.
Wizards
There are several wizards which allow the user to set-up various functions and commission
the Inverter. An example of the type of wizards are given below:
● Basic commissioning
● Open Loop Compressor
● Closed Loop Compressor
● Roller Conveyor
● Open Loop Fan
● Closed Loop Fan
● Open Loop Pump
● Closed Loop Pump
● Safety Commissioning
● PID
● Boost
Intelligent Operator Panel (IOP)
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
WARNING
4
21