Creating The Exception List - Siemens Sinamics G120 Operating Instructions Manual

6.

Creating the exception list

To create the list of parameters that will be included in the exception list, the following
procedure should be performed:
1.
2.
3.
4.
Intelligent Operator Panel (IOP)
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Input the number of parameters to be included in the
exception list.
Important note: Although the maximum range shown on
the screen is 65535, the maximum number of
parameters in the exception list must not exceed 500.
Select "Menu" from the main screen.
Select "Parameters" from the menu.
Select "Search by number" from the Parameters menu.
Input "07764" then press "OK"
Menu
6.7 Know-how Protection
85