Menu
6.2 Diagnostics
Communications status
The option displays the status of the fieldbus interface and the
details of the settings for the data exchange, for example
status words and control word lengths.
In the example shown opposite, the status of the fieldbus
communications is shown.
I/O simulation
Loss of control of the Inverter
If the Inverter is started using the I/O simulation and the IOP is removed from the Inverter it
will not be possible to stop the Inverter running the motor. If the I/O simulation is activated,
then only the I/O simulation can be used to stop the Inverter.
The IOP simulation screen allows digital and analog IOs to be
simulated without the requirement for external signals. These
features are of great benefit during commissioning and fault
finding, as the user can quickly simulate a situation without
using wires, tools and external equipment.
60
WARNING
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Intelligent Operator Panel (IOP)