Maintenance; Device Reset - Siemens SITRANS LR260 Operating Instructions Manual

7.1.5.9

Maintenance

You can set schedules and reminders for:
● device maintenance based on its projected lifetime
● sensor maintenance based on its projected lifetime
● service
● calibration
To set Device/Sensor Maintenance schedules:
1. Open the menu Device - Maintenance, and click on the Remaining Device/Sensor Lifetime
tab.
2. Modify desired values, and click on Write.
3. Click on Read, to see the effects of your modification.
4. If desired, activate alerts for either or both of Maintenance Required/Maintenance
Demanded.
5. Click on Snooze to add a year to the Total Expected Device Life.
To set Service/Calibration schedules:
1. Open the menu Device - Maintenance, and click on the Service/Calibration Schedule tab.
2. Modify desired values, and click on Write.
3. Click on Read, to see the effects of your modification.
4. If desired, activate alerts.
5. Click on Service Performed to reset the schedule.
7.1.5.10

Device Reset

Factory Defaults
SITRANS LR260 with mA/HART
Operating Instructions, 11/2019, A5E32337683-AD
Operating
7.1 Operating via SIMATIC PDM
69