Figure 6-1
Parameter groups
All parameters
This options allows the user access to the individual
parameters of the Inverter. The default filter is "Standard"
which allows the user access to the most frequently used
parameters. The default filter settings can be changed by
selecting "Parameter filter" from the "Parameter settings"
option in the "Extras Menu".
Quick commissioning
This screen displays a complete listing of all the parameters
required for quick commissioning. The parameters are listed in
numerical order and can be accessed to either confirm the set
values or modified should there be a need to fine tune the
application or correct any errors in the parameter values.
Saving & reset
This option allows the user access to all the parameters
regarding the saving and reset functions of the Inverter. Each
parameter displays is currently set value and these can be
modified if required.
Intelligent Operator Panel (IOP)
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Parameters - Drive Object Selection
Menu
6.3 Parameters
63