Overview
2.2 Layout and functions
Note
IOP functional support
• Drives with SINAMICS firmware prior to version 4.2 may not be fully supported by the
IOP.
• The actual menu structure and functionality of the IOP will be influenced by the following
factors:
– The software version and type of Control Unit to which the IOP is fitted.
– The firmware and software version of the IOP.
– The selected functional group filtering of the parameters.
2.2
Layout and functions
The physical layout of the IOP is shown below:
Figure 2-1
Layout of IOP
The IOP is operated by using a push-wheel and five additional buttons. The specific
functions of the push-wheel and buttons are shown in the table below.
10
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Intelligent Operator Panel (IOP)