Display Mode - Siemens Sinamics G120 Operating Instructions Manual

Installation
3.2 Initial Set-up

Display mode

To change the display mode, the following actions should be performed:
1. Rotate the Wheel to select "Menu".
2. Press the Wheel to confirm selection.
3. The "Menu" screen is displayed.
4. Rotate the Wheel to select "Extras".
5. Press the Wheel to confirm selection.
6. The "Extras" screen is displayed.
7. Rotate the Wheel to select "Panel Settings"
8. Press the Wheel to confirm selection.
9. Rotate the Wheel to selected "Display mode".
10. Press the Wheel to confirm selection.
11. The "Display mode" screen is displayed.
12. Rotate the Wheel to select the required setting.
– "Normal" displays white text on a black background.
– "Inverse" displays black text on a white background.
13. Press the Wheel to confirm selection.
14. The display returns to the "Extras" menu.
15. Press "Esc" for more than 3 seconds to return to the
"Status" screen.
20
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Intelligent Operator Panel (IOP)