Search By Number; My Parameters; Changed Parameters - Siemens Sinamics G120 Operating Instructions Manual

Search by number

This option allows the user to search for a specific parameter
number. Should the parameter number not exist, then the
nearest parameter to the entered value is displayed.
Use the Wheel to alter the value of each digit and press the
Wheel to confirm. The next digit will automatically be
highlighted, rotate the Wheel to change the value and press
the Wheel to confirm. Once all fields have been entered, the
IOP will display the parameter. If a wrong digit is selected,
press Esc to go back one digit.
If the parameter number does not exist, the screen will display
a choice between "Select a new number" or "Go to the
nearest parameter number".

My parameters

This option allows the user to select the parameters that they
wish to list. The user is presented with a list of parameters that
can be selected. Once selected - only those parameters are
displayed when the "My Parameters" option is selected. There
are additional options that allow the user to manage their list
of parameters.

Changed parameters

When the "Changed parameters" option is selected the IOP
will search the Inverter parameter list for all the parameters
that have had their values changed from the factory default
settings.
Once the search is complete, the screen will present a list of
all parameters that have changed values.
The individual parameters can be accessed so that their
current values can be displayed and modified if necessary.
Intelligent Operator Panel (IOP)
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Menu
6.3 Parameters
67