Screen Icons; Demo Mode; Locking And Unlocking The Keypad - Siemens Sinamics G120 Operating Instructions Manual

Overview

2.3 Screen icons

DEMO mode

DEMO mode allows the IOP to be used for demonstration purposes without affecting the
Inverter to which it is connected. Menus can be navigated and functions selected, but all
communications with the Inverter are blocked to ensure that the Inverter does not react to
any commands issued from the IOP.

Locking and unlocking the keypad

To lock the IOP keypad press ESC and INFO simultaneously for 3 seconds or more. To
unlock the keypad press ESC and INFO simultaneously for 3 seconds or more.
2.3 Screen icons
The IOP displays a number of icons at the top right-hand edge of the display to indicate
various states or current conditions of the Inverter. These icons are explained in the table
below.
Table 2- 2
Function
Command source
Inverter status
Fault pending
Alarm pending
Saving to RAM
PID autotuning
Hibernation mode
Write Protection
Know How Protection
ESM
Battery condition
12
Screen icons
Status
Auto
JOG
Hand
Ready
Running
Fault
Alarm
Active
Active
Active
Active
Active
Active
Fully charged
¾ charged
½ charged
¼ charged
No charge
Charging
Icon Remarks
Displayed when the JOG function is active.
Icon rotates when the motor is running
Indicates all data is currently saved to RAM. If
power is terminated all data is lost.
Parameters cannot be modified.
Parameters cannot be viewed or modified.
Essential Services Mode
The battery status is only shown when the IOP
Hand-held kit is used.
Operating Instructions, 03/2013, FW V1.4, A5E00110011A4 AB
Intelligent Operator Panel (IOP)