Configuring Basic Security - Motorola AP-7131N-FGR Installation Manual

Hide thumbs Also See for AP-7131N-FGR:
Table of Contents

Advertisement

9. Click
Apply
screen without clicking Apply results in all changes to the screens being lost, unless you use
the
Un-applied Changes
10. Click
Undo Changes
settings displayed on the Quick Setup screen to the last saved configuration.

3.4.1 Configuring Basic Security

For testing basic connectivity, there is no reason to configure a server supported authentication
scheme. By default, WPA2/CCMP Pre-Shared Key is enabled as a basic security scheme sufficient to
protect the AP-7131N-FGR's transmissions. For details on configuring other authentication and
encryption options available to the access point, refer to the AP-7131N-FGR Access Point Product
Reference Guide. The guide is available on the Motorola Solutions Web site, at
https://portal.motorolasolutions.com/Support/US-EN
To configure WPA2/CCMP:
1. From the Quick Setup screen, click the
The
New Security Policy
authentication and WPA2/CCMP (802.11i) options selected. Consequently, the basic
security scheme of WPA2/CCMP is always enabled.
NOTE
2. Ensure the
Name
Multiple WLANs can share the same security policy, so be careful not to name security
policies after specific WLANs or risk defining a WLAN to single policy. Motorola Solutions
recommends naming the policy after the attributes of the authentication or encryption
type selected.
to save any changes to the Quick Setup screen. Navigating away from the
pop-up window to overwrite the current settings.
(if necessary) to undo any changes made. Undo Changes reverts the
screen displays with the Manually Pre-shared key/No
For information on configuring other encryption and authentication
options available to the access point, refer to the AP-7131N-FGR Access
Point Product Reference Guide. The guide is available on the Motorola
Solutions Web site, at
https://portal.motorolasolutions.com/Support/US-EN
of the security policy suits the intended configuration of the policy.
Create
button to the right of the Security Policy item.
Basic Configuration
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents