Configuring Basic Ap-5131 Device Settings; Configuring Basic Device Settings - Motorola AP-5131 Installation Manual

4.2 Configuring "Basic" Device Settings
Configure a set of minimum required device settings within the
values defined within the Quick Setup screen are also configurable in numerous other locations
within the AP-5131 menu tree. When you change the settings in the Quick Setup screen, the values
also change within the screen where these parameters also exist. Additionally, if the values are
updated in these other screens, the values initially set within the Quick Setup screen will be updated.
The following table illustrates the changes made to the access point's default configuration.
Version 1.0
WAN DHCP client
Auto-Update
Enabled
LAN 1 Static IP:
192.168.0.1
Static Mask:
255.255.255.0
DHCP Server
Enabled
LAN 2 Not applicable in
1.0 release
Access HTTPS, SSH, SNMP:
via Enabled
WAN
port
To define a basic AP-5131 configuration:
Version 1.1
Static IP: 10.1.1.1 Static IP: 10.1.1.1
Static Mask:
255.0.0.0
DHCP Client
Auto-Update
Enabled
Default Gateway
Ethernet Port
Enabled
Static IP:
192.168.1.1
Static Mask:
255.255.255.0
DHCP Server
Enabled
HTTP, HTTPS, SSH, HTTP, HTTPS, SSH,
SNMP, Telnet:
Enabled
Basic AP-5131 Configuration
AP-5131 Quick Setup
Version 1.1.1.0
& 1.1.2.0
Static IP: 10.1.1.1
Static Mask:
255.0.0.0
DHCP Client
Auto-Update
Enabled
Default Gateway Default Gateway
Ethernet Port
Enabled
Disabled
HTTP, HTTPS, SSH,
SNMP, Telnet:
Enabled
screen. The
Version 2.0
Static Mask:
255.0.0.0
DHCP Client
Auto-Update
Enabled
Ethernet Port
Enabled
Disabled
SNMP, Telnet:
Enabled
25