Adjusting Volume; Adjusting Ring Volume; Adjusting Tones Volume - AudioCodes 445HD User Manual

User's Manual
5.9

Adjusting Volume

The phone allows you to adjust
Ring volume

Tone volume (e.g., dial tone)

Handset volume

Speaker volume

Headset volume

5.9.1

Adjusting Ring Volume

The volume of the phone's ring alerting you to an incoming call can be adjusted to suit personal
preference.
Note:
By default, you can adjust ringing volume in the phone's LCD. Your network
administrator, however, can block this capability and provision ringing volume remotely. If this
was done and you need to adjust the ringing volume, consult your network administrator.
 To adjust ring volume:
1.
When the phone is in idle state, press the VOL
Volume bar is displayed on the screen:
2.
After the adjustment, the Ringer Volume level disappears from the screen.
Note: You can alternatively press the upper and lower rim of the navigation control button to
increase or decrease ring volume, tones volume or call voice volume. When you press the
OK on the navigation control button, the volume screen disappears.
5.9.2

Adjusting Tones Volume

The phone's tones, including dial tone, ring-back tone and all other call progress tones, can be
adjusted to suit personal preference.

To adjust tones volume:
1. Off-hook the phone (using handset, speaker or headset).
2. Press the VOL
Version 3.4.3
or VOL key; the Tones Volume bar displays on the screen:
37
5. Customizing the Phone
or VOL key on the phone; the Ringer
445HD IP Phone