Blurred Print Or Color Misalignment Check - Lexmark CS720 Service Manual

Action
Step 4
•
If the affected color is cyan, magenta, or yellow, then replace
the developer unit of the affected color.
•
If the affected color is black, then replace the imaging unit.
Does the problem remain?
Step 5
Replace the imaging kit.
Does the problem remain?

Blurred print or color misalignment check

Action
Step 1
Remove, and then reinstall the transfer belt.
Does the problem remain?
Step 2
a
Enter the Diagnostics menu, and then navigate to:
Advanced Print Quality Samples > Advanced Print Quality
Samples
b
Check the test page.
Is only one color blurred or misaligned?
Step 3
•
If the affected color is cyan, magenta, or yellow, then replace
the developer unit of the affected color.
•
If the affected color is black, then reseat the imaging unit.
Does the problem remain?
Step 4
Perform the color alignment service check for the affected color.
Does the problem remain?
Step 5
•
If the affected color is cyan, magenta, or yellow, then replace
the developer unit of the affected color.
•
If the affected color is black, then replace the imaging unit.
Does the problem remain?
Diagnostic information
40
Yes No
Go to step 5. The problem is
solved.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 2. The problem is
solved.
Go to step 3. Go to step 6.
Go to step 4. The problem is
solved.
Go to step 5. The problem is
solved.
Go to step 6. The problem is
solved.
5028