Print Is Too Dark Check - Lexmark MS517dn Service Manual

Print is too dark check

Actions
Step 1
Check if the printer is using a genuine and supported Lexmark
toner cartridge.
Note: If the printer is using a third‑party cartridge, then refer the
users to their cartridge supplier.
Is the printer using a genuine and supported toner cartridge?
Step 2
Install a genuine and supported toner cartridge.
Does the problem remain?
Step 3
a
Turn off the printer, wait for 10 seconds, and then turn on the
printer.
b
From the control panel, reduce the toner darkness in the
Quality menu.
Note: 8 is the factory default setting.
Does the problem remain?
Step 4
From the control panel, set the paper type, texture, and weight in
the Paper menu to match the paper loaded.
Does the problem remain?
Step 5
Depending on the operating system, specify the paper type,
texture, and weight from Printing Preferences or Print dialog.
Does the problem remain?
Step 6
a
Check if the paper loaded has texture or rough finishes.
b
From the control panel, set the paper texture in the Paper menu
to match the texture of the paper loaded.
Does the problem remain?
Diagnostics and troubleshooting
52
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 4. The problem is
solved.
Go to step 5. The problem is
solved.
Go to step 6. The problem is
solved.
Go to step 7. The problem is
solved.
4514-6xx