Page 1
Loading the multipurpose feeder Quick Reference Open the multipurpose feeder. Loading paper Loading trays CAUTION—TIPPING HAZARD: To reduce the risk of Flex, fan, and align the paper edges before loading. equipment instability, load each tray separately. Keep all other trays closed until needed. Adjust the guide to match the size of the paper you are loading.
Load the paper. Select the job to cancel. Printing • Load paper, card stock, and transparencies with the printable side facedown and the top edge entering the printer first. Maintaining the printer Printing from a computer Note: For specialty media such as labels, card stock, and Replacing a toner cartridge envelopes, set the paper size and type in the printer before sending the print job.
• Insert the new toner cartridge until it into place. Do not slide paper into the tray. Load paper as shown in the Paper jam in trays illustration. Pull out the tray. Close door A. Clearing jams Avoiding jams Remove the jammed paper. Load paper properly Note: Make sure that all paper fragments are removed.
Open the tray cover. Paper jam in the multipurpose feeder Flex, fan, and align the paper edges before loading. Remove paper from the multipurpose feeder. Remove the jammed paper. Note: Make sure that all paper fragments are removed. Reload paper. Paper jam in the standard bin Remove the jammed paper.
Close door B. Paper jam in door B Close door B. Paper jam in the fuser Open the fuser access door. Open door B. Paper jam in the duplex unit CAUTION—HOT SURFACE: The inside of the printer Open door B. might be hot.
Page 6
Note: Make sure that all paper fragments are removed. Close the duplex cover and door B. Open the duplex cover. Remove the jammed paper. Note: Make sure that all paper fragments are removed.