Sensor (Tps) Removal - Lexmark CS720 Service Manual

5
Remove the two waste toner bottle stops (B), and then remove the toner door from the right cover assembly.

Sensor (TPS) removal

1
Remove the controller board shield. See
2
Remove the inner controller board shield. See
3
Remove the TPS sled. See
4
Disconnect the thermistor cable (A) from the controller board.
"Controller board shield removal" on page
"Inner controller board shield removal" on page
"TPS sled removal" on page
A
Repair information
325
327.
5028
356.
357.