Entering Password - Fuji Xerox 1015S Series Instruction Manual

Entering Password

1.4
If the Auditron Mode is enabled, you need to enter your password (by department/user) before you can start
making copies.
This section explains how to enter the password and to display the User Password Entry screen. Approach
your Auditron Administrator if you need a user password.
The Auditron Mode allows you to control the number of copies that each account (by department/user) can make. The setting
and change of passwords are handled by the Auditron Administrator via the Auditron Administration Mode screen.
Please enter the password.
Password Entry Screen
When the copying is done, the
display returns to the User
Password Entry screen.
Unauthorized user with no password
cannot make copies.
If you have set a timeout period for
the Password Entry Screen timeout,
the display will return to the User
Password Entry screen even if you
did not press the Password button.
For details, refer to "8.5.4 Auditron
Setup".
If you made a mistake while entering
the password, press the Clear
button to clear, and then re-enter.
Key in the password and touch Enter.
Enter
To clear the password, you have entered,
pass C button.
Procedure
1
Press Password.
The User Password Entry screen
is displayed.
2
Enter your password by using the keypad.
Each digit input is represented by an asterisk.
3
Select Enter on the screen.
The Copier screen appears once you have entered the correct password.
1 2 3
4 5 6
7 8 9
0
Clear
19