Checking Job Status - Fuji Xerox 1015S Series Instruction Manual

4.1 Basic Copying Procedures
4.1.4

Checking Job Status

On the Job Status screen, you can check job status like whether the documents are being scanned
for copying or a print job is being carried out.
You can also pause or cancel jobs that are displayed on the list.
Where there are no ongoing jobs, the Job Status screen will not be displayed even if you select the Job Status button.
Pausing/resuming ongoing operations
To pause and resume ongoing operations.
When you want to verify settings,
select the job to be checked and
press the Check Settings button. For
details, refer to "4.1.2 Checking
Settings".
If multiple files stored in the folder
are selected and to be reprinted,
only one file is displayed.
You cannot assign the files stored in
the folder to the next job while you
are copying the current job, or you
cannot reserve the next job while
reprinting the files stored in the
folder.
If Auto Print feature is enabled for
the files stored in the folder, only the
one file that is currently being
printed is displayed. You can check
which files are set to be printed
through the shared folder. Refer to
"6.2 Setting Folder" for the shared
folder.
56
6
Repeat steps to continue scanning of other documents.
Procedure
1
During a copying
press the Job Status
button.
You can check the job status on
the Job Status screen displayed.
2
Select the job that you want to pause and then select Pause.
Copying or scanning of documents for copying will be paused.
Once the job is paused, the message, "Stop/User Action" will be displayed
under Job Status.
Job Status
Time
1 2000-08-21_11-03-32
2
2000-08-21_10-55-59
3 2000-08-21_10-52-45
4
2000-08-21_10-50-05
5 2000-08-21_10-47-50
6 2000-08-21_10-45-23
job,
Quantity Job Status
0/ 20 Print Wait
0/ 12 Stop/User Action
0/ 10 Print Wait
0/ 10 Print Wait
0/ 50 Print Wait
22/ 35 Stop/User Action
Promote
Delete Job
Job
Close
Prev
1/2
Next
Pause