D Originals/Copies Orientation (With Drilled Paper) - Fuji Xerox 1015S Series Instruction Manual

Copies result
Staple (resulting Orientation on DADF
image)
to Top
No staples
No
staple
s
to Left
*1: This table displays the orientation for A4 size documents and copies. Refer to this table when the output orientation is Auto (Face
down).
*2: The document loading direction pertains to the DADF.
For information on document orientation, refer to "5.14 Specifying Image Orientation".
*3: For information on stapling setting, refer to "5.5 Stapling".
*4: For information on output orientation, refer to "5.24 Outputting Face Up/Down".
*5: If the required setting has been made by a customer engineer, you can load the drilled paper in the same orientation as the output
orientation into the tray. Contact your Customer Support Center.
*2
Head
Head

D Originals/Copies Orientation (With Drilled Paper)

*5
Copy paper setting
Tray 1 Tray 2 to 4
-
Output
Tray 6
*4
orientation
(high
capacity)
-
415