Fuji Xerox 1015S Series Instruction Manual page 127

3
Specify settings for other features if necessary.
4
Press Start.
The document is scanned, a sample copy of the document is made according
to the settings, then the machine temporarily stops.
When a sample copy is output, a screen appears to prompt you to verify the
copy.
5
Check the sample copy.
To continue copying:
To continue copying the remaining copies, select Start.
The remaining copies will be made after the sample copy is confirmed.
When canceling copying:
To cancel copying of the remaining copies, select Cancel Job.
The remaining copies are not made and the display returns to the Sample Set
screen.
Changing the number of copies:
When changing the remaining number of copies, use the keypad to enter the
number.
Canceling stapling/punching:
To output the remaining copies without stapling/punching, select
Cancel Finishing.
5.8 Making Sample Copies
101