Fuji Xerox 1015S Series Instruction Manual page 172

5.26 Copying With Covers
Output Orientation of Covers (Face Up or Down)
When copying with covers attached, the output orientation for tray 5 (bypass) and tray 7 differs as
follows:
• With tray 5 (bypass) loaded, Face Up selected for Output Orientation and the papers to be used as covers
are placed facing up, the covers will be output facing up.
• With tray 7 loaded, Face Up selected for Output Orientation and the papers to be used as covers are
placed facing up, the covers will be output facing down.
The following table shows the image orientation on paper to be delivered to the finisher tray or the
output tray.
Output
Orientation
Face Up
Face Down
The table above indicates that Normal/Heavywt 1 is selected for tray 5 (bypass).
For more details on the orientation of the document and paper to be used as covers when copying with covers attached and
with stapling/punching setting, refer to "Appendix C Originals/Copies Orientation (With Covers)".
146
Original
Select Not Select
Orientation
Delivered to Finisher
Tray (Staple:Top Left)
Head to Top
—
Head to Left
—
Head to Top
Head to Left
Tray 5
Tray 7
Not Select
Delivered to
Output Tray
(Staple/Punch:Off)
—
—
Tray 7
Delivered to
Finisher Tray
(Staple:Top Left/
Off)
—
—