Copying On Tab Paper; Copying On Tab Paper [Tab Copying] - Fuji Xerox 1015S Series Instruction Manual

You can copy images from a document onto tab paper by specifying the copied position within a range of 1-15
mm so that the image would be copied onto the tab.
These copied papers can be loaded in Tray 7 and used as covers or separators.
Available tab paper sizes are A4 portrait and 8.5×11" portrait.
Be sure to use the tab paper recommended by Fuji Xerox. Otherwise, a paper jam or failure may result.
Document
Report
Copy to Tab
The image is copied only onto the tab of the tab paper. You can specify the position to shift within a range of
1 to 15 mm.
Shift All
The entire page is copied onto the tab paper. You can specify the position to shift within a range of 1 to 15
mm.
The factory setting for the margin shift is 13 mm.
Tab Copying cannot be selected with Margin Shift, Edge Erase, Binding Erase, Multiple Up, Repeat Image, Booklet Creation,
Annotation, Bound Originals, Book Duplex, or 2 Sided Copying features.
It is recommended that 100% for Reduce/Enlarge is set to copy onto the correct position.
You can select only the left position for stapling/punching on tab papers.
"3.2 Loading Documents"
164

Copying on Tab Paper

5.29
Copy
Copy to Tab Shift All
Report
Range of shifting
: Original size
the image (1-15 mm)
Procedure
1
Select Tab Copying on the Output Format screen.
Basic
Features
Multiple Up
1 Up
Repeat Image
Off
Annotation
Off
The Tab Copying screen appears.
Using copies as covers or separators
Report
Report
Report
Added
Image Quality Output Format
Features
Transp. Separators
Off
Covers
No Covers
Tab Copying
Off
Tab Copying
Stored
Job Templates
Output Orientation
Auto
Booklet Creation
Off
Folding
Off