Changing Tools Password - Fuji Xerox 1015S Series Instruction Manual

8.3 Setting Tools Mode
8.3.2

Changing Tools Password

You can change the password for accessing Tools Mode.
You can enter a password between 4 to 12 digits.
"8.1.1 Using System Administrator
Mode"
"8.1.2 Entering/Exiting Tools Mode"
Each input digit is represented by an
asterisk. If you made a mistake
while entering the password, press
the C button to clear, and then re-
enter.
310
Procedure
1
Display the Tools Mode screen.
2
Select Administrator Password.
Tools Mode
Tools Menu
Paper Tray
Attributes
Copy Defaults
Others
The Administrator Password screen is displayed.
3
Use the keypad to enter the new password.
Tools Mode
Tools Administator Password
1. Key in the new password and
select Enter.
2. Key in the same password for
confirmation and select Enter.
Note: The password must be 4-12 digits.
4
Select Confirm.
Tools Mode
Tools Administator Password
1. Key in the new password and
select Enter.
2. Key in the same password for
confirmation and select Enter.
Note: The password must be 4-12 digits.
Audio Tones Timers
Screen Layout Reduce/Enlarge
Presets
Image Quality Scan Mode
Settings
New Password
Confirmation Password
Reset
New Password
Confirmation Password
Reset
Exit
Administrator
Password
Original Size
Defaults
Close
Confirm
Close
Confirm