Administrator Password - Fuji Xerox 1015S Series Instruction Manual

8.2 Overview of Tools Mode
Timers
You can set the time needed to automatically activate the following items:
Item
Job Complete
Auto Clear
Job Program Auto
Clear
Low Power Mode
Power Saver Off
Mode
System Admin
Mode Exit
Connection Reject
Connection Accept

Administrator Password

You can change the Tools password for accessing the System Administration Mode.
You can set a password of 4 to 12 characters. The factory setting of the password is 11111.
"8.3.2 Changing Tools Password"
300
Description
Specify the time for the feature settings to return to
their default values automatically after copying is
completed.
Specify the time for the feature settings to return to
their default values automatically after incomplete job
settings were made.
Specify the time for the machine to automatically
switch to the Low Power Mode after copying is done
or some operations have been made.
"1.2.2 Saving Energy"
Specify the time for the machine to automatically
switch off the power after a copying is done or some
operations have been made. This feature is not
available when Power Saver Off Mode of the Others
feature in Tools Mode is set to Disabled.
Enabled must be selected for Auto Power Saver Mode for the
Others feature before the setting here can be specified.
"1.2.2 Saving Energy"
Specify the time for the machine to automatically
return to the default screen after settings have been
made in Tools Mode.
Set the time to accept print and scan requests after all
selections of a copy job have been cleared.
Set the time to accept print and scan requests before
all selections of a copy job have been cleared.
Available options
1 to 59 sec (in 1 sec
increments),
1 to 10 min (in 1 min
increments),
2 min*, Disable
1 to 59 sec (in 1 sec
increments),
1 to 10 min (in 1 min
increments),
2 min*, Disable
1 to 240 min (in 1 min
increments),
15 min*
15 to 240 min (in 1 min
increments),
60 min*
10 to 60 min (in 1 min
increments),
10 min*, Disable
1 to 59 sec or 1 to 10 min (in
1 sec/min increments)
1 to 59 sec or 1 to 10 min (in
1 sec/min increments)
* indicates the factory setting.