Making Sample Copies; Making Sample Copies [Sample Set] - Fuji Xerox 1015S Series Instruction Manual

When making multiple copies, you can output a single sample in advance.
Making a sample copy allows you to confirm function settings and make sure that the copy appearance meets
your expectations.
The remaining copies will be made after the sample copy is confirmed.
Off
A sample copy is not made.
On
A sample copy is made.
After one copy is made, the machine temporarily stops. After checking the sample copy, you can choose
whether to make the remaining copies, or to cancel copying.
Pressing Start does not start copying if Uncollated has been selected.
When Auto is selected, the copies are output in the Collated mode.
Program Ahead cannot be selected during output of a sample copy.
Interrupt copying is not possible while the screen prompting for sample copy verification is displayed.
Sample copying cannot be selected when printing a file that has been saved on the server.
The factory setting is Off for the feature.
The factory setting can be changed on the system administrator screen. For the setting change procedure, see "8.1 System
Administrator Mode".
"3.2 Loading Documents"
To cancel the Sample Copy feature,
select Sample Set again.
100

Making Sample Copies

5.8
Procedure
1
Load the documents.
2
Select Sample Set on the Basic Features screen.
Basic
Features
1 -> 1 Sided
1 -> 2 Sided
(Head to Head)
2 -> 2 Sided
(Head to Head)
2 -> 1 Sided
(Head to Head)
More...
The Sample Copy feature changes to On.
Added
Image Quality
Features
2 Sided Reduce/Enlarge
100%
Auto %
70%
A3->A4,B4->B5
81%
B4->A4,B5->A5
86%
A3->B4,A4->B5
141%
Sample Set
A4->A3,B5->B4
Off
More...
Doc.>50
Off
Sample Set
Stored
Output Format
Job Templates
Paper Supply
Original Type
Auto
Text
(Normal Text)
Tray 1
A4 P Mixed Size
Originals
Tray 2
Off
A4
Tray 3
B4
Finishing
Tray 4
A3
Auto
Tray 5 (Bypass)
A4 P
Lighter/Darker
Tray 6 (HCF)
A4 P