Touch Panel Display - Fuji Xerox 1015S Series Instruction Manual

1.3.2

Touch Panel Display

The touch panel display is located at the left side of the control panel. It displays the messages and
feature buttons required for performing a copy job. By touching the display with your fingers, you can
make settings or select required screens. In the following section, the main screens will be used to
explain the screen contents, as well as how to select the feature buttons. The touch panel display will
be referred to as the display from now on. And the contents shown on the display will be referred to
as the screen.
Copy and
Copy
Save
Ready to copy
Basic Added
Features Features
2 Sided Reduce/Enlarge
1 -> 1 Sided
1 -> 2 Sided
(Head to Head)
2 -> 2 Sided
(Head to Head)
2 -> 1 Sided
(Head to Head)
More...
Sample Set
Off
Doc.>50
Off
Switch Mode buttons
You can use these buttons to switch between the basic copying and server operation.
Select Copy to make copies.
Select Copy and Save to make copies and to save the scanned document data to the server.
Select Save to File to save scanned document data to the server.
Select Build Job to define build job settings.
Select Edit/Print Files to change names of copy files and scan files saved to the server, merge copy files,
duplicate/move copy files, change settings and print copy files.
Select Scan to scan documents such as photographs as image data. Scanned document data is stored in
a mailbox as scan files. Scan files stored in mailboxes can be downloaded onto client computers.
"6 Server"
"7 Scanning"
Free Memory
Indicates the amount of remaining hard disk memory in % that can be used for saving copied or scanned
document data.
Free Memory doesn't mean the amount of remaining memory that can be used for scanning.
Paper Remaining
The number of horizontal lines increases and decreases accordingly to display the amount of paper
remaining in the paper tray: 100%, 75%, 50%, 25% or No paper.
During copying, a green indicator lights up on the left of the tray icon that is being used.
Tray 5 (bypass) has a horizontal line that indicates paper being loaded.
Tray 6 (HCF) is optional. If it is not installed, the icon will not be displayed.
Save to
Build Job
File
Image Quality Output Format
Paper Supply
100% Auto
Auto % Tray 1
A4 P
70% Tray 2
A3->A4,B4->B5 A4
81% Tray 3
B4->A4,B5->A5 B4
86% Tray 4
A3->B4,A4->B5 A3
141% Tray 5 (Bypass)
A4->A3,B5->B4 A4 P
More... Tray 6 (HCF)
A4 P
1.3 Using the Touch Panel Display
Edit/Print
Scan
Files
Original Count 0 Memory
80%
1
Quantity
Stored
Paper
Job Templates
Remaining
1
Original Type
Text
2
(Normal Text)
Mixed Size
3
Originals
Off
4
Finishing
Auto
5
Lighter/Darker
6
Switch mode buttons
Memory
Paper Remaining
13