Original Size Defaults - Fuji Xerox 1015S Series Instruction Manual

8.2 Overview of Tools Mode
Reduce/Enlarge Presets
There are two types of settings for Reduce/Enlarge Presets.
Reduce/Enlarge Presets
You can select the six preset ratios (besides 100%, Auto%, 50%) for Reduce/Enlarge on the Basic Features
screen.You can choose from 20 ratios to assign to the six buttons for Reduce/Enlarge Presets.
Item
Reduce/Enlarge Preset
1 (Top left)
Reduce/Enlarge Preset
2
Reduce/Enlarge Preset
3
Reduce/Enlarge Preset
4 (Top right)
Reduce/Enlarge Preset
5
Reduce/Enlarge Preset
6
100% Fine-tune
You can fine-tune the value of 100% in Reduce/Enlarge on the Basic Features screen, between the range
of 98.0% to 102.0% in 0.1% increments. If 100% is selected for Variable% or Independent XY%, the value
you have fine-tuned will not be applicable. Even if you have fine-tuned the value, the Reduce/Enlarge
display on the Basic Features screen will remain as 100%.

Original Size Defaults

You can set the document sizes to be displayed when you select Original Size on the Added
Features screen.
Besides the button for Auto Size Detect, you can assign document sizes to the remaining 11 buttons.
It would be good to specify frequently-used non-standard sizes here so that there is no need to
specify the size each time you need to use it for copying. To specify non-standard sizes, select Input.
304
25%, 35% (A3→A6), 50% (A3→A5), 64% (11×17"→8.5×11"),
70% (A3→A4 B4→B5), 78% (8.5×14"→8.5×11"),
81% (B4→A4 B5→A5)*, 86% (A3→B4 A4→B5)*,
97% (A4→8.5×11"), 115% (B4→A3 B5→A4)*,
122% (A4→B4 A5→B5)*, 127% (8.5×13"→A3), 129% (8.5×11"→11×17"),
141% (A4→A3 B5→B4)*, 154% (5.5×8.5"→8.5×14"), 180%,
200% (A5→A3), 220% (5.5×8.5"→11×17"), 282% (A6→A3),
400%
Available options
* indicates the factory setting.