Manually Selecting Paper Tray - Fuji Xerox 1015S Series Instruction Manual

5.3.2

Manually Selecting Paper Tray

The following procedure describes how to select a paper tray loaded with the desired paper size
for copying. Options available are:
When the optional high capacity feeder is installed, select Tray 6 (HCF).
Tray 1, Tray 2, Tray 3, Tray 4
Select a paper tray loaded with the desired paper size.
Tray 5 (Bypass)
Select this for paper that cannot be loaded in tray 1, 2, 3, and 4.
Selecting trays 1, 2, 3, or 4
To select a paper tray from trays 1, 2, 3, or 4 that is loaded with your desired paper size.
When paper is not loaded in the selected tray or when the orientation of the document and the paper for copying differs, a
message will be displayed. Follow the instructions to proceed.
"3.2 Loading Documents"
3
Using the keypad, enter the number of copies desired and
then press Start on the control panel.
Copies will be made.
Procedure
1
Load the documents.
2
From Paper Supply, select the paper tray with the desired
paper size.
Basic Added
Features Features
2 Sided
1 -> 1 Sided
1 -> 2 Sided
(Head to Head)
2 -> 2 Sided
(Head to Head)
2 -> 1 Sided
(Head to Head)
More...
Sample Set
Off
Doc.>50
Off
5.3 Selecting Paper Tray
Image Quality Output Format
Reduce/Enlarge Paper Supply
100% Auto
Auto % Tray 1
A4 P
70% Tray 2
A3->A4,B4->B5 A4
81% Tray 3
B4->A4,B5->A5 B4
86% Tray 4
A3->B4,A4->B5 A3
141% Tray 5 (Bypass)
A4->A3,B5->B4 A4 P
More... Tray 6 (HCF)
A4 P
Stored
Job Templates
Original Type
Text
(Normal Text)
Mixed Size
Originals
Off
Finishing
Auto
Lighter/Darker
85