Installing The Mezzanine Card - Dell PowerEdge MX760c Installation And Service Manual

Figure 106. Removing the Mezzanine-B card
Next steps
1. Install the mezzanine
2. Follow the procedure listed in

Installing the Mezzanine card

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
NOTE: Mezzanine B card is supported only on dual-processor configuration.
Steps
1. Align the connector on the Mezzanine card with the connector on the system board.
2. Place the Mezzanine card on the connector and press the blue touch point firmly until it is fully seated.
3. Using the Phillips #2 screwdriver, tighten the captive screws on the Mezzanine card.
card.
After working inside your
Safety
Before working inside your system
system.
instructions.
Installing and removing system components 127