Dell PowerEdge M830 Owner's Manual page 128

Figure 57. Installing a 2.5-inch (x4) SATA hard-drive or SSD backplane
1. hard-drive or SSD backplane
3. guide pin (5)
5. retention screw on the hard-drive or SSD
backplane cable connector (2)
Next steps
1. Install the hard drives or SSDs in their original locations.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing a 2.5-inch (x4) SATA hard-drive or SSD backplane
Installing the system cover
Installing a blade
After working inside your system
128
2. release latch (2)
4. hard-drive or SSD backplane cable
6. connector