Mezzanine Card Support Bracket; Removing The Mezzanine Card Support Bracket - Dell PowerEdge M830 Owner's Manual

Figure 17. Installing a mezzanine card
1. mezzanine card (2)
3. retention latch
Next steps
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing a mezzanine card
After working inside your system

Mezzanine card support bracket

Removing the mezzanine card support bracket

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the mezzanine card support bracket to replace a faulty system board.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the #2 Phillips screwdriver ready.
4. Remove the mezzanine card.
2. mezzanine card connector (2)
79