Video Specifications; Environmental Specifications - Dell PowerEdge M830 Owner's Manual

Blade server
Hide thumbs Also See for PowerEdge M830:
Table of Contents

Advertisement

Video specifications

The PowerEdge M830 system supports Matrox G200 VGA controller integrated with iDRAC and 2 GB
video memory is shared with iDRAC application memory.

Environmental specifications

NOTE: For additional information about environmental measurements for specific system
configurations, see Dell.com/environmental_datasheets.
Table 9. Temperature specifications
Temperature
Storage
Continuous operation (for altitude less
than 950 m or 3117 ft)
Fresh air
Maximum temperature gradient
(operating and storage)
Table 10. Relative humidity specifications
Relative humidity
Storage
Operating
Table 11. Maximum vibration specifications
Maximum vibration
Operating
Storage
Table 12. Maximum shock pulse specifications
Maximum shock pulse
Operating
Storage
20
Specifications
–40°C to 65°C (–40°F to 149°F)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the
equipment
For information about fresh air, see the Expanded Operating
Temperature section.
20°C/h (36°F/h)
Specifications
5% to 95% RH with 33°C (91°F) maximum dew point.
Atmosphere must be non-condensing at all times.
10% to 80% RH with 29°C (84.2°F) maximum dew point.
Specifications
0.26 G
at 5 Hz to 350 Hz (all operation orientations)
rms
1.88 G
at 10 Hz to 500 Hz for 15 minutes (all six sides
rms
tested)
Specifications
Six consecutively executed shock pulses in the positive and
negative x, y, and z axes of 40 G for up to 2.3 ms.
Six consecutively executed shock pulses in the positive and
negative x, y, and z axes (one pulse on each side of the
system) of 71 G for up to 2 ms.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge fc830Fhb

Table of Contents