Cooling Shroud; Removing The Cooling Shroud - Dell PowerEdge M830 Owner's Manual

Blade server
Hide thumbs Also See for PowerEdge M830:
Table of Contents

Advertisement

Cooling shroud

The cooling shroud has aerodynamically placed openings that directs the airflow across the entire
system. The airflow passes through all the critical parts of the system, where the vacuum that pulls air
across the entire surface area of the processor and heat sink allowing increased cooling.

Removing the cooling shroud

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
CAUTION: Never operate your system with the cooling shroud removed. The system may get
overheated quickly, resulting in shutdown and loss of data.
NOTE: You must remove the cooling shroud to service other components inside the system.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
Steps
Hold the cooling shroud at both ends and lift it away from the system.
Figure 11. Removing a cooling shroud
1.
cooling shroud
3.
guide pin (2)
Next steps
1.
Install the cooling shroud.
2.
Follow the procedure listed in the After working inside your system section.
2.
tab (4)
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge fc830Fhb

Table of Contents