Initializing The Tpm For Bitlocker Users; Initializing The Tpm For Txt Users - Dell PowerEdge M830 Owner's Manual

Figure 71. Installing the TPM
1. rivet slot on the system board
3. TPM
Next steps
1. Install the system board.
2. Follow the procedure listed in the After working inside your system section.

Initializing the TPM for BitLocker users

Initialize the TPM.
For more information about initializing the TPM, see
cc753140.aspx.
The TPM Status changes to Enabled, Activated.

Initializing the TPM for TXT users

1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS → System Security Settings.
3. From the TPM Security option, select On with Pre-boot Measurements.
4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Enter System Setup again.
8. On the System Setup Main Menu screen, click System BIOS → System Security Settings.
9. From the Intel TXT option, select On.
2. plastic rivet
4. TPM connector
http://technet.microsoft.com/en-us/library/
155